Tachograph Simulator DTCO SIM CAN

£ 209.09£ 293.07

Tested on 2021 trucks.

Tachograph Simulator DTCO SIM CAN completely replace the tachograph device on any compatible vehicle and generates all necessary signals required by other electronic modules of the vehicle.

V1 version – you can only completely remove Tachograph, there is no Start/Stop option
V2 version – drive with Tachograph Start/Stop option

SKU: tachograph-simulator Category: Tags: , ,


Tachograph data sheetPlease pay attention to this note before purchasing this item. To make your experience as good as possible, we need to know more information about your truck so that we could set up the emulator for maximum compatibility. We need to know the year or production of your vehicle and the code located on the original tachograph of your vehicle (you can see an example on the right). Please provide this data and the data required individually by each model under product selection (select vehicle model and you’ll see the red text below) by email or in the “Additional information” field (checkout page). Thank you.

Tachograph Simulator DTCO SIM CAN device is made to emulate tachograph. It can replace tachograph devices on the vehicles where it is not needed, but other electronic modules require tachograph signals to work properly. Tachograph Simulator DTCO SIM CAN module designed to generate signals listed below, all of them compatible with ISO 16844-1.

Tachograph Simulator DTCO SIM CAN signals

  • V imp, 4 imp/m
  • Zero speed signal
  • Vehicle speed (via CAN line)
  • Distance traveled (K-line or CAN line)
  • Date and time (K-line or CAN line)

Tachograph Simulator DTCO SIM CAN module could be powered by 12V or 24V vehicle power line and consumes 40mA. Tachograph Simulator DTCO SIM CAN is programmable for better compatibility with other vehicle electronic modules. Several parameters (list below) of tachograph emulation could be changed.

Tachograph Simulator DTCO SIM CAN programmable parameters

  • Odometer
  • Characteristic constant of vehicle (w)
  • Number of impulses per one shaft revolution (PTO)
  • Product code (ES)
  • Vehicle Identification Number (VIN)
  • System time

Moreover, it has „k” constant setting range of 4000 ÷ 64000 imp/km, 8V DC power output for the speed sensor. The device is capable of working in the temperature range from –40°C to +85°C.

Attention!It’s illegal to use this equipment in several countries. You assume full responsibility for the use of the device. It’s your decision to use an tachograph emulator or not. We will not accept any liability for any consequences associated with usage of tachograph simulation devices.

Additional information

Weight 0.3 kg
Dimensions 20 × 10 × 5 cm

1 year warranty